Easy exchange of facade banners
SMART-Lift Extend is delivered in a complete kit and it is very easy to assemble.
The banner can be easily changed without using an installation company or skylift. SMART-Lift Extend is a variant of the SMART-Lift FRAME with extended side profiles that allows you to change the banner standing on the ground, even if the banner is to be displayed several meters above the ground.
Cover plates that hide the top profile are included. SMART-Lift FRAME is delivered in any width up to 24 meters. Over 12 meters, 1 winch per side is used.
The SMART-Lift needs to be mounted on a flat surface. If the banner is to cover protruding fittings you will need to fit spacers to enable the banner to be hoisted up and down without colliding with the protruding parts.
Banner, spacers and any lighting are not included.
Outer dimensions of the SMART-lift Extend
– Width = Image dimensions + 350 mm
– Height = Image dimensions + length of the extension + 680 mm
Natural anodised aluminium profiles is supplied in 6 m stock lengths or can be cut to custom sizes. Recommended media: Net vinyl or Vinyl with 7.5-10mm keder sewn on 4 sides. The SMART-Lift FRAME is adapted to the size of the banner.
|SMART-Lift Extend 3000x2000
|Adapted from the banner 3000x2000 mm